Yes, each Smart Pathway Light has a button to turn the light on and off manually without using the Hombli app.

To control all lights together you need to group devices together:

1. Open the Hombli App and select one of the Pathway Lights
2. ap the pencil icon and select “Create Group”
3. Add the Pathway Lights to the group and tap “Save”
4. Choose a group name and select “Save”
5. The group will show up on the home screen as a new device

Yes! Every Smart Pathway light can be controlled separately, so you can for instance set a different color for each light.

Yes, the Smart Pathway Light has a IP65 rating, which means it can withstand heavy rain.

To reset the Smart Pathway light, you have to hold the button for 5 seconds, the light will start blinking.

For some Bluetooth devices it is possible to add them directly to the app via the Bluetooth connection of the phone. If you want to control them from anywhere, you need to add a Bluetooth Bridge, which will connect the device to the internet. After you added the Bridge to your Hombli app, follow these steps to connect them to your Bluetooth Bridge:

1. Make sure the device is added to the app and connected to the phone.
2. Go to the Bluetooth bridge.
3. Press on ‘Add’.
4. Select the device(s) you want to connect to the Bluetooth Bridge

There are two methods to make a connection between a Hombli Smart Wall light and your home network:
1. With a Bluetooth bridge
2. Without a Bluetooth bridge

1. With a Bluetooth Bridge

1. Add the Bluetooth Bridge first and check if it is connected.
2a. Connect the Pathway Lights.
2b. If the Light is not blinking, turn the lights on and of 3 times or hold the button for 5 seconds until the light starts blinking.
3. Open the Bluetooth bridge in the Hombli app.
4. Tap “Search” to search for new devices.
5. Follow the instructions in the app to add the Pathway Lights.

2. Without a Bluetooth bridge

For this method you need to be within 15 meters to the pathway light in order to control the device. Add a Bluetooth bridge if you want to control the pathway light from anywhere.

1. Enable Bluetooth on your smartphone.
2. Tap in the Hombli app on the green plus symbol to add a device
3. Choose Add Manually at the top of the screen.
4. Choose the Smart Pathway Light in the category “Outdoor”
5. Tap on continue when the light of the Pathway Light(s) are flashing.
6. If the Pathway Light does not flash as shown in the screen, choose “help” for instructions to reset.

A starter pack comes with 3 pathway light, you can extend this with 3 more extensions. Bringing the total possible number of pathway lights that can be connected to one socket to 6.

Not necessarily, adding a bridge adds several advantages:

*Bluetooth SigMesh ensures a better connection and wider range with more devices.